Sheet Laser Cutting Machine
The QYLBC-3015 laser cutting machine is equipped with an electric chuck, which automatically adjusts the center and maintains stable tension. Plate materials of different specifications and sizes are perfectly matched to meet complex production requirements. Product Features 1. The machine bed...
Products Description
The QYLBC-3015 laser cutting machine is equipped with an electric chuck, which automatically adjusts the center and maintains stable tension. Plate materials of different specifications and sizes are perfectly matched to meet complex production requirements.
Product Features
1. The machine bed is made of high-strength plate and tube welding, and is annealed at 600°C high temperature to eliminate stress/vibration aging to ensure that it will not deform after long-term use.
2. The entire set adopts servo transmission system imported from Japan to ensure higher precision, faster speed and more stable operation.
3. The control system is easy to operate, has more comprehensive compatibility, and makes processing more flexible and efficient.
4. Brand laser: You can choose any imported or domestically produced laser, with stable performance and a service life of 100,000 hours.
5. Humanized design, user experience is more practical.
6. Imported electrical components.
7. Ultra-low cost, lower energy consumption, and can be used to cut various metal sheets with air assistance.
Product Specification
|
Maximum operating speed
|
100m/min
|
|
maximum acceleration
|
4G
|
|
X/Y positioning accuracy
|
±0.03mm
|
|
X/Y repeat positioning accuracy
|
±0.02mm
|
|
Voltage
|
380V/50Hz
|
|
Total machine power
|
15kw-20kw
|
|
Machine tool operating temperature
|
5-45℃
|
|
Machine tool operating humidity
|
≤80% no condensation
|
|
Transfer method
|
Rack double drive
|
Advantages of Laser Cutting
1. Unparalleled Precision and Superior Cut Quality
- Extreme Precision: Achieve extremely tight tolerances, which is critical for parts that require precise fits and complex assemblies.
- Narrow Slit: The actual cutting width (slit width) is minimal, allowing for complex pattern designs, sharp corners, and less material waste.
- Minimal Heat Affected Zone (HAZ): Significantly less thermal impact on surrounding materials compared to plasma, reducing warpage and maintaining material integrity, especially on thinner sheets.
- Clean Edges: Laser cutting typically produces smooth, clean edges with minimal spatter or burrs, greatly reducing or eliminating the need for secondary finishing processes. This saves time, labor, and cost.
2. Speed Matters: Increased Output
- Fast Cutting of Thin Plates: For materials commonly used in sheet metal fabrication (up to approximately 10-15 mm),
- Process Complex Designs Faster: The ability to quickly navigate through complex patterns and small holes without losing precision contributes to faster part production overall.
- Increased speed translates directly into higher output, shorter lead times, and the ability to take on more work, increasing your overall productivity and profitability.
Product Application
Metal Material
Metal sheet laser cutting machines can cut a wide range of metals, even though highlyreflective metals. For instance. carbon steel, stainless steel, aluminum, copper, brass.titanium, nickel. and various alloys.
Application Industry
The sheet metal laser cuting machine has extensive applications in decoration, infrastructureconstruction, microelectronic, advertising, kitchen appliance, automobile and other equipmentmanufacturing, and other industries.
Packing & Delivery
1. Anti-collision package edge: All parts of the machine are covered with some soft materials, mainly the use of pearl wool.
2. Fumigation wooden box: our wooden box is fumigated, do not need to check the wood, saving the transport time.
3. Whole film packaging machine: Avoid all damage that may occur during delivery. Then we will cover the plastic package tightly to ensure that the soft material is covered intact, also avoiding water and rust.
FAQ
1. What is fiber laser?
A fiber laser is a special type of solid state laser. Generally, fiber lasers are optically pumped. This is done by coupling the radiation of diode laseers or other fiber lasers into the cladding or the core itself in a direction parallel to the fibr core. In many cases, double clad fibers are used in order to achieve higher output power.
2. What's material can fiber laser cut?
All kinds of metal, such as Stainless Steel,Carbon Steel, Mild Steel, Galvanized Steel, Aluminum, copper, etc.
Hot Tags: sheet laser cutting machine, China, suppliers, manufacturers, factory, customized, price, 1000w Laser Welding Machine, 300W Solid State Pulsed Laser Cleaning Machine, , Magnet Laser Cleaning, Carbon Fiber Laser Cleaning, Cultural Relics non destructive Laser Cleaning
Send Inquiry
